Terms of service
The installation of the PoolfenceDIY.com pool fence safety system requires that holes be drilled into the surface surrounding the pool area. Holes will be drilled 4 ½” inches into your patio deck to insert the sleeves for your new pool fence. The drill bit will create dust during the drilling action. This dust must be rinsed off to prevent the staining of your deck. Life Saver Pool Fence Systems, Inc. and PoolfenceDIY.com cannot be held liable for the cleanliness of your deck before, during, or after the installation of the PoolfenceDIY.com pool safety system. There may be a slight water run-off into your pool causing the pool to become a little cloudy; your pool pump and the filter will clear this up with normal operation. PoolfenceDIY.com and Life Saver Pool Fence Systems, Inc. are not responsible for water or utility lines buried in your deck, yard, or any area in or around your property. Most codes require that your utility lines (water, electric, telephone, gas, etc.) be installed at a depth below where you will be drilling. While it is rare, if you feel this is not the case for your pool deck area, you must complete the necessary research to indicate the locations of such utility lines to avoid drilling through them. As with any other childproofing device, your new pool fence is only intended to supplement direct adult supervision and is not intended to replace direct adult supervision. The Pool Safety Fence System must be securely latched and closed at all times. Never leave a child unattended. Check your pool fence periodically for proper function.